KI164 1Way Sprag Freewheel Custom Bearing Fabrication

               KI164 1Way Sprag Freewheel Custom Bearing Fabrication

Features

 Type KI is a roller type freewheel. It is an assembly comprising of an inner race and rollers fitted into a polyamide cage. This type of unit can not be dismantled. It is designed for small mechanisms in office equipment, or packaging machines, to be mounted inside gears or feed

rollers.

 The gear or feed roller inner diameter is used as the outer race. Additional bearing support is required, and the freewheel must not be subjected to axial loading; mounting examples are shown on the following page. The outer race does not need to be hardened; min. strength: 700 N/mm2

The surface roughness will not exceed 22 CLA.Mounting onto the shaft can be a press fit to r6 tolerance or a glue fit with a clearance of 0,02 to 0,05mm.

 Sizes 8 mm and above can be supplied with a keyway.Temperature range: –40°C to +100°C (continuous operation).Peak temperatures of +120°C are acceptable for short periods of time.

Technical Datas

Diamensions and Capacities

NOTES

1) T max = 2 × T KN

» Refer to Selection page 10 to 13

*) Can be also supplied with a keyway to DIN 6885.1

2) Inner race overruns

3) Outer race overruns

Mounting and Coupling

PICTURES