please choose your language
Products list

Backstops are used extensively on pumps used in the primary and secondary cooling systems of power generating equipment.
contact us
Telephone:86-519-85858018
Linkman:Ellen Zhang
Mobile phone:86-18068536660
FAX:86-519 85858018
E-mail:ellen@chinasuma.com
address:DONGHUA INDUSTRY PARK, WUJIN DISTRICT, CHANGZHOU, JIANGSU PROVINCE, CHINA PR.
            
honors
One way clutch bearing ASK
  • https://www.chinasuma.com/uploadfiles/103.224.250.119/webid106/pc_water/201601/145266121986.png
introduction

One way clutch bearing ASK

Feature

Type ASK is a roller type freewheel bearing supported by two rows of roller bearings. It is a self-contained dust protected unit, delivered grease lubricated.

Nominal outside dimensions are the same as a 60.. series bearing. Torque transmission must be ensured by a press fit on both the inner and outer race. Because of this press fit, the standard radial clearance is C4. The interference tolerances are on the freewheel dimensions, allowing a direct mounting in a standard series 60.. bearing location: Shaft tolerance should be h6 or j6 The outer race should be pressed into a rigid housing to K6 tolerance.

Radial bearing load capacities are given in the table. Type ASK freewheels can not accept axial loading. In cases of such loads, thrust bearings must be provided.

 


 

TypeSizeBearing series Bearing loadsWeightDragtorque
dynamicstatic
ASKdP6 TKN1)nmaxDLCC0 TR
[mm][Nm][min-1][mm][mm][kN][kN][kg][Ncm]
40600872350068151620.60.2515
5060101252200801619.623.50.3420
6060122501800951825.335.10.525

 

NOTES
1) Tmax = 2 × TKN 
    » Refer to Selection page 10 to 13
» Refer to mounting and maintenance instructions page 16 to 19
MOUNTING EXAMPLE

Immediately Consult
Message *
Name *
Phone
Email*
Verification code *
Telephone: 86-519-85858018    Mobile phone: 86-18068536660    Fax: 86-519 85858018
E-mail: ellen@chinasuma.com
Copyright © 2014   Changzhou Suma Precision Machinery Co., Ltd   All Rights Reserved
Designed by  Zhonghuan Internet   Site Map