please choose your language
Products list

Backstops are used extensively on pumps used in the primary and secondary cooling systems of power generating equipment.
contact us
Linkman:Ellen Zhang
Mobile phone:86-18068536660
FAX:86-519 85858018
Features of Combined Needle Roller Bearing

Features of Combined Needle Roller Bearing

Have Read 72302/25/2020

  Combined needle roller bearing is a centripetal needle bearing and thrust bearing or bearing unit of angular contact ball bearing components combination, the compact structure small volume, rotation of high precision, high in can bear radial load at the same time absorb a certain amount of axial load. A variety of forms, wide adaptability and product structure, easy to install.

  Widely used in machine tools, metallurgical machinery, textile machinery and printing machinery. The combined needle roller bearing is used in the fitting shaft where the design is the bearing raceway. Or with the company's special IR standard inner ring for insert processing, there is no requirement for shaft hardness, its structure will be more compact. Widely used in machine tools, metallurgical machinery, textile machinery and printing machinery and other mechanical equipment, and can make mechanical system design more compact and flexible.

Structure form

  This kind of bearing has centripetal needle and thrust full load ball, or with thrust ball, or with thrust cylindrical roller, or with angular contact ball, can bear unidirectional or bidirectional axial load. Can also be designed according to the user special structure requirements.


The product precision

Dimensional tolerance and geometric accuracy as per JB/T8877.

The diameter of the rolling needles differs from each other by 2 m, and the accuracy class is G2 (GB309).

The inner circle diameter of the bearing without inner ring before assembly conforms to the tolerance grade F6.

The radial clearance of the bearing conforms to group 0 of GB/T4604.

Special accuracy class is GB/T307.1.

Please contact us for details of special requirements on bearing clearance, internal cutting circle and accuracy level.



The needle rolling material is GCr15 bearing steel, hardened HRC60 -- 65.

The inner and outer rings are made of GCr15 bearing steel, hardened HRC61 -- 65.

The cage material is high quality low carbon steel or reinforced nylon.

Special instructions

The axial load of NKIA and NKIB series bearings shall not exceed 25% of the radial load.

Support applications for alternating axial loads must be mounted against each other.

Thrust bearing components must be preloaded up to 1% of the basic axial static rated load.

Continuous operation with plastic cage (suffix TN) shall not exceed operating temperature +120°C.

The thrust bearing parts shall move freely in the housing.

For general bearing configuration design, see related recommendations in rolling bearing application technology.



Overall dimensions of roller needle and thrust cylindrical roller combination bearings (gb-11)

Dimensions of combined needle roller bearing and thrust ball bearing (jb-1)

Overall dimensions of needle roller bearings and angular contact ball combined bearings (jb-1)

Dimensions and tolerances of roller needle and two-way thrust cylindrical roller combination bearings (jb-3)

JB/T8877 -- 2001 technical conditions for needle roller combination bearings (jb-12)


View More(Total0)Comment Lists
No Comment
I want to comment
Content *
Verification Code*
Telephone: 86-519-85858018    Mobile phone: 86-18068536660    Fax: 86-519 85858018
Copyright © 2014   Changzhou Suma Precision Machinery Co., Ltd   All Rights Reserved
Designed by  Zhonghuan Internet   Site Map