Backstops are used extensively on pumps used in the primary and secondary cooling systems of power generating equipment.
address:DONGHUA INDUSTRY PARK, WUJIN DISTRICT, CHANGZHOU, JIANGSU PROVINCE, CHINA PR.
A wide range of applications backstops FRHMHave Read 545902/27/2016
A wide range of applications backstops FRHM
Complete Freewheels FRHM with torque arm are sealed sprag freewheels with ball bearings. Supplied oil-filled and ready for installation The freewheels FRHM are arranged on through shafts or shaft ends. The freewheels FRHM are used as:
for low-speed applications. They are designed for use in inclined conveyor-belt systems, elevators and pumps. Taconite seals protect the backstops when conditions are dirty and dusty.
Maximum torques up to 56 000 lb-ft.
Bores up to 7 inch.
Backstop FRHM 900-12 on the head pulley shaft of an inclined conveyor. The back driving torque is restricted by the torque arm on the base plate.
The back driving torque is restrained by the torque arm. The torque arm must not be clamped into position. It must have 0.5 inch play in the axial and in the radial direction.